M5-128/68-20YI/1 Overview

There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).A 100-BQFP package contains the item.This device has 68 I/O ports programmed into it.The termination of a device is set to [0].QUADis the terminal position of this electrical part.A voltage of 5V is used as the power supply for this device.This part is part of the family [0].Ideally, the chip should be packaged by Tray.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.The chip should be mounted by Surface Mount.The MACH? 5series FPGA is one of these types.100pins are programmed on the chip.The device can also be used to find [0].The M5-128shows its related parts.In digital circuits, 5000gates serve as building blocks.Data is stored using [0].In this case, Surface Mountis used to mount the electronic component.The device has a pinout of [0].There is a maximum supply voltage of 5.5V.It is powered by 4.5Vas its minimum supply voltage.This device runs on 5Vvolts of electricity.It is recommended that the maximal frequency be lower than 83.3MHz.

M5-128/68-20YI/1 Features

100-BQFP package
68 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
5V power supplies

M5-128/68-20YI/1 Applications

There are a lot of Lattice Semiconductor Corporation M5-128/68-20YI/1 CPLDs applications.

• Custom state machines
• I/O PORTS (MCU MODULE)
• Software-driven hardware configuration
• DDC INTERFACE
• I/O expansion
• Multiple DIP Switch Replacement
• POWER-SAVING MODES
• State machine design
• USB Bus
• Code converters