M5LV-128/74-15VI Overview

This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).In the 100-LQFPpackage, you will find it.The device has 74inputs and outputs.It is programmed that device terminations will be 100 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.FPGAs belonging to the MACH? 5series contain this type of chip.In this chip, the 100pins are programmed.If you use this device, you will also find [0].The M5LV-128indicates that related parts can be found.It is possible to construct digital circuits using 5000gates, which are devices that serve as building blocks.The supply voltage should be maintained at 3.3V for high efficiency.In general, it is recommended to store data in [0].With a maximum supply voltage of [0], it operates.It operates with the minimal supply voltage of 3V.There are a total of 100 Programmable I/Os.It is important to make sure that the maximum frequency is less than 55.6MHz.

M5LV-128/74-15VI Features

100-LQFP package
74 I/Os
The operating temperature of -40°C~85°C TA
100 pin count

M5LV-128/74-15VI Applications

There are a lot of Lattice Semiconductor Corporation M5LV-128/74-15VI CPLDs applications.

• Page register
• PLC analog input modules
• Multiple Clock Source Selection
• STANDARD SERIAL INTERFACE UART
• Digital multiplexers
• USB Bus
• Voltage level translation
• Programmable polarity
• I/O PORTS (MCU MODULE)
• Timing control