LT1079MJ Overview
A 14-CDIP (0.300, 7.62mm) case is used to package the op amp. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 14. It consists of a total of 14 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 14 pins on it. In terms of input offset voltage, operational amplifier rates 150μV. This electronic part is recommended for mounting type Through Hole. It is recommended to keep the voltage gain at 120dB at all times. In order for this buffer op amp to function, it should have a temperature of at least -55°C degrees Celsius. A temperature greater than 125°C should not be used for the operation of buffer amplifier. Op amp has total of 4 elements. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 44V, and this is an excellent feature. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.2V. This electrical part should be conducted under the dual supply voltage of 22V volts when you conduct this part.
LT1079MJ Features
14 Pins
supply voltage of 15V
120dB voltage gain
LT1079MJ Applications
There are a lot of Linear Technology/Analog Devices LT1079MJ Instrumentational OP Amps applications.
- Vehicle electronics
- Semiconductor detectors
- Logarithmic operation circuits
- Instrumentation
- Multiplication circuits
- Thermocouples
- Band-stop filter
- Weighing systems
- Tablets
- Automation control systems
