LT1496CS#PBF Overview

There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are located on the operational amplifiers. The input offset voltage is 150μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 1.4μA . It is recommended to keep the voltage gain at 113.98dB at all times. On the buffer amps, there are 4 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. Instrumentation amplifiers are numbered by their Over-The-Top® series.

LT1496CS#PBF Features

14 Pins
supply voltage of 15V
113.98dB voltage gain
Output Type: Rail-to-Rail

LT1496CS#PBF Applications

There are a lot of Linear Technology/Analog Devices
LT1496CS#PBF Instrumentational OP Amps applications.

• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation