LT1510CN#PBF Overview

There is a package for Tube in which it can be found.In the package 16-DIP (0.300, 7.62mm), there is a version of it.Mounting type for the device is Through Hole.It is best to set the temperature to 0°C~70°C TA.There is an analog IC of BATTERY CHARGE CONTROLLER used in this device.The device requires Constant - Programmable current to charge.Parts related to the base part number LT1510 can be found based on that number.In total, there are 16 terminations.It is a 20V Max voltage for the battery pack.With 16 pins on it, it has a very simple design.It is necessary to connect the 16 pins during the installation process of this product.Devices require 28V as their maximum supply voltage.An input voltage of 30V can be applied to the device without damage.In the case of 20V output voltage, there is a possibility of optimal efficiency.There is a constant output current of 1.5A when it is operating.A power supply voltage as low as 7V can be used for it and it will work as well as possible.In most cases, the maximum supply voltage (Vsup) is set to 4.5mA.Input voltage is limited to 7V volts at the lowest.A 16V input voltage is applied to the device.It can accept a maximum input voltage of 29V volts.It is most common to find parts with 200kHz switching frequencies.

LT1510CN#PBF Features

Battery pack voltage of 20V Max
16-DIP (0.300, 7.62mm) package

LT1510CN#PBF Applications

There are a lot of Linear Technology/Analog Devices LT1510CN#PBF Battery Chargers ICs applications.

• Portable speaker systems
• Medical
• Electric lift car
• Fleet management
• Laptops
• Power tools
• Personnel carriers
• Smart cameras
• Smart power strips
• Solar charging