LT1510IGN#PBF Overview

I found it in the Tube package, which comes with everything you need.The package 16-SSOP (0.154, 3.90mm Width) includes a version of it.A Surface Mount mounting type is assigned to the device.If the temperature is set to -40°C~85°C TA, reliable performance will be assured.A analog IC of BATTERY CHARGE CONTROLLER has been used in the design of this device.Device charging requires Constant - Programmable current.The base part number LT1510 represents its related parts.As far as the terminations are concerned, there are 16.This battery pack has a voltage of 20V Max.The device has 16 pins in total.You need 16 pins for it to work.Using a 16V battery should be enough to run it.As long as the supply voltage is 30V, it is capable of withstanding the voltage.Using a 20V output voltage results in high efficiency.There is a constant output current of 1.5A when it is operating.The device you are looking at belongs to the subcategory of Power Management Circuits.The device can operate at as low a supply voltage as possible, such as 7V.It was determined during the design process that Vsup (maximum supply voltage) should be set to 4.5mA.As far as the input voltage is concerned, it has a minimum of 7V volts.There is 16V voltage input on the device.There is a maximum input voltage of 29V volts that it can take.This part has a maximum switching frequency of 220kHz.

LT1510IGN#PBF Features

Battery pack voltage of 20V Max
Power Management Circuits subcategory
16-SSOP (0.154, 3.90mm Width) package

LT1510IGN#PBF Applications

There are a lot of Linear Technology/Analog Devices
LT1510IGN#PBF Battery Chargers ICs applications.

• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift
• Boat