LT1510IN#PBF Overview

There is a package for Tube in which it can be found.We've included it in the 16-DIP (0.300, 7.62mm) package so that it's easier to use.Mounting type for the device is Through Hole.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of BATTERY CHARGE CONTROLLER must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number LT1510 can be found by following the order of the base part number.It contains a total of 16 terminations.As far as the battery pack is concerned, it is 20V Max.It is equipped with 16 pins.As long as it is charged at maximum current, it will be rated as 1.5A.Devices require 28V as their maximum supply voltage.It should be able to run off a battery of 16V.When the output voltage is 2.465V, high efficiency is possible.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.Vsup (maximum supply voltage) is set in the command to 4.5mA.The part's power supply is set to a value of 16V.Voltage input for the device is 16V.Input voltage should not be less than 8V volts.In the most extreme case, the part switches at 200kHz.This device accepts a maximum input voltage of 28V.

LT1510IN#PBF Features

Battery pack voltage of 20V Max
Power Management Circuits subcategory
16-DIP (0.300, 7.62mm) package

LT1510IN#PBF Applications

There are a lot of Linear Technology/Analog Devices
LT1510IN#PBF Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift