LT1510IS#PBF Overview

There is a package for Tube in which it can be found.We've included it in the 16-SOIC (0.154, 3.90mm Width) package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of BATTERY CHARGE CONTROLLER must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number LT1510 can be found by following the order of the base part number.It contains a total of 16 terminations.As far as the battery pack is concerned, it is 20V Max.It is equipped with 16 pins.As long as it is charged at maximum current, it will be rated as 1.5A.It requires pins 16 to function.It should be able to run off a battery of 16V.In order for the device to operate properly, the supply voltage should not exceed 30V.When the output voltage is 20V, high efficiency is possible.In this case, the output current of the device is set to 1.5A.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 7V is suitable for it, because it can operate with a low supply voltage.Vsup (maximum supply voltage) is set in the command to 4.5mA.A minimum input voltage of 7V volts is required for this device.Voltage input for the device is 16V.Input voltage is limited to 29V volts.In the most extreme case, the part switches at 200kHz.

LT1510IS#PBF Features

Battery pack voltage of 20V Max
Power Management Circuits subcategory
16-SOIC (0.154, 3.90mm Width) package

LT1510IS#PBF Applications

There are a lot of Linear Technology/Analog Devices
LT1510IS#PBF Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift