LT1512CN8#PBF Overview

There is a package for Tube in which it can be found.We've included it in the 8-DIP (0.300, 7.62mm) package so that it's easier to use.Mounting type for the device is Through Hole.It is recommended that the temperature be set to 0°C~70°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of BATTERY CHARGE CONTROLLER must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number LT1512 can be found by following the order of the base part number.It contains a total of 8 terminations.It is equipped with 8 pins.As long as it is charged at maximum current, it will be rated as 1A.Devices require 25V as their maximum supply voltage.It should be able to run off a battery of 5V.When the output voltage is 1.245V, high efficiency is possible.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.Vsup (maximum supply voltage) is set in the command to 5.5mA.The part's power supply is set to a value of 5V.Voltage input for the device is 5V.Input voltage should not be less than 2.7V volts.In the most extreme case, the part switches at 580kHz.This device accepts a maximum input voltage of 25V.

LT1512CN8#PBF Features

Power Management Circuits subcategory
8-DIP (0.300, 7.62mm) package

LT1512CN8#PBF Applications

There are a lot of Linear Technology/Analog Devices
LT1512CN8#PBF Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift