You can find it in the Tube package.It is contained in a package named TO-263-8, D2Pak (7 Leads + Tab), TO-263CA.Mounting type Surface Mount matches the device.If you wish to ensure reliable performance, set the temperature to -40°C~125°C TJ.In order to provide its functionality, this device uses an analog IC called BATTERY CHARGE CONTROLLER.It is necessary to supply the device with Constant - Programmable current in order to charge it.There are related parts for this device under the base part number LT1513.It contains 7 terminations, so that is how many there are.Batteries pack have 20V Max.Total number of pins: 7.Product functionality is dependent on 7 pins.It is recommended to use devices with a maximum supply voltage of 25V.There is a possibility that it can be powered by a 5V battery.An input voltage that is equal to 29V can be applied to it without any problem.20V output voltages can result in high efficiency.In order to operate, an output current of 2A is used.Devices belonging to subcategory Power Management Circuits include this device.It is capable of functioning at a voltage as low as possible, for example 2.7V voltage for this circuit is used.In most cases, the maximum supply voltage (Vsup) is set to 5.5mA.With respect to the power supply for the part, it is set to 5V.Input voltage is limited to 2.4V volts at the lowest.It can be seen that the device has an input voltage of 5V.This device can accept up to 30V volts of input voltage.It is most common to find parts with 580kHz switching frequencies.
LT1513-2IR#PBF Features
Battery pack voltage of 20V Max Power Management Circuits subcategory TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package
LT1513-2IR#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1513-2IR#PBF Battery Chargers ICs applications.