LT1641-2CS8#TRPBF Overview

Package 8-SOIC (0.154, 3.90mm Width) includes it.As of now, 1 channels are available.Tape & Reel (TR)-shaped packaging is used for this product.This device has a total of 8 terminations.A device's terminal position is DUAL.8 pins make up the entire device.An efficient supply voltage is possible with 24V.There is a Surface Mount-like arrangement.In the electrical industry, this component is categoriHot Swap Controllered as Hot Swap Controller.For reliable performance, the temperature should be set to 0°C~70°C.There are General Purpose applications available for the device.An article about it appears in Auto Retry.In the case of a 9V~80VV power source, it should work just fine.In the LT1641 family, it appears as a number.Programmable features include Current Limit, Fault Timeout, OVP, Slew Rate, UVLO.Hot-swappable device is estimated that there is a current supply of 2mA.For normal operation, the supply voltage (Vsup) should be kept above 9V in order to maintain a constant level of power.Set Vsup to 80V for maximum supply voltage.In terms of power supplies, it is the character 9/80V that appears on the part.A maximum supply current of 5.5mA is required for the device to operate.This device can also be used to produce UNDERVOLTAGE LOCKOUT; OVERVOLTAGE PROTECTION as well.

LT1641-2CS8#TRPBF Features

The terminal position of 8
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO

LT1641-2CS8#TRPBF Applications

There are a lot of Linear Technology/Analog Devices
LT1641-2CS8#TRPBF hot swap controllers applications.

• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems
• Power supply hotswap & inrush control