LT1920CS8#PBF Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the Instrumentation type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 125μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 900μA, this op amp ic can operate. As far as the device is concerned, buffer amplifier has 1 channels. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 3. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 1. Linear amplifier resistance should stay within the range of 200GOhm.

LT1920CS8#PBF Features

8 Pins
supply voltage of 15V
Resistance of 200GOhm

LT1920CS8#PBF Applications

There are a lot of Linear Technology/Analog Devices
LT1920CS8#PBF Instrumentational OP Amps applications.

• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection