LT318AH Overview

The linear amplifier is packaged in a TO-205-8, TO-5-8 Metal Can case. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. There is a Bulk case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are located on the operational amplifiers. There is an input offset voltage of 1mV for this buffer op amp. Through Hole is the recommended mounting type for this linear amplifier. It is a member of the 113.98dB's 113.98dB family. The temperature should not be lower than 0°C for operational amplifier ics to operate. Use op amp only at temperatures no higher than 70°C. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 20V.

LT318AH Features

8 Pins
supply voltage of 15V
113.98dB voltage gain

LT318AH Applications

There are a lot of Linear Technology/Analog Devices LT318AH Instrumentational OP Amps applications.

• High/low-pass filter circuit
• Fission chambers
• Signal filtering
• Logarithmic operation circuits
• ECG equipment
• Power control
• Multiplication circuits
• High input resistance broadband
• Blood pressure sensors
• Ultrasound transducers