LT3475IFE#PBF Overview

There is also a 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package that is used to save space on the board. LED drivers have a total of 2 outputs that are used in the design of the drivers.In order to mount the led light driver, Surface Mount is used.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.Automotive, Backlight, Lighting has many benefits.It operates based on the frequency of 200kHz~2MHz.In this case, it uses 20 terminations.In this LED driver, the base is configured as 20.It is likely that undetermined failures will occur if the voltage supply is less than 3.7V.It is estimated that there are 1 segments.You can find this LED driver under the base part number LT3475.It's acceptable for the voltage to be 36V.20 pins are on the device.It operates with the minimal input voltage of 4V.The maximum efficiency standards can be met by operating at the minimal voltage of 4V during operation.

LT3475IFE#PBF Features

Available in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 200kHz~2MHz
Supply voltage of 12V

LT3475IFE#PBF Applications

There are a lot of Linear Technology/Analog Devices LT3475IFE#PBF LED Driver ICs applications.

• A- lamps
• Architectural lighting
• LED Lightings for Inspection Devices
• LED headlights
• General lighting
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• LED backlight driver for LCD displays for portable equipment
• Panel lighting
• Down lighting
• Scanners and Handy Terminals