LT3570EFE#PBF Overview

In order to make voltage regulators' voltage regulators' transportation easier, it is packaged in 20-TSSOP (0.173, 4.40mm Width) Exposed Pad.The shipment of package Tube has been completed.Voltage regulator supports 3 outputs in total.If you want to avoid malfunctions, set the operating temperature to -40°C~125°C.You can get more pin-to-pin solutions by searching LT3570.On the switching regulator, you will find 20 terminals.The pinout of the switching regulator starts from 20 pins it has.Prior to proceeding with relow solder, the temperature of the solder must peak 260.20-pattern pins are used in this voltage regulator.A regulator voltage like this with an output voltage of 800mV can be used for a wide range of applications.The input voltage required for this regulator is voltage ≥ 2.5V.voltage regulators of this type can use voltages up to 36V.There is a Adjustable output on this regulator controller.There should be an output of 2.4A from the DC DC Switching Regulator at this time.It is designed to produce the maximum amount of current 1.5A possible.This controller is capable of outputting 800mV volts as its lowest voltage.

LT3570EFE#PBF Features

3 outputs
Operating Temperature: -40°C~125°C
Peak Reflow Temperature: 260

LT3570EFE#PBF Applications

There are a lot of Linear Technology/Analog Devices LT3570EFE#PBF Linear Regulator Controllers applications.

• Personal Computers
• Network Interface Card/Switch
• Constant high-current source
• TVs
• Adjustable Supplies
• Low-Voltage DSP Power Supplies
• Desknotes and Notebooks
• Ultra-Low-Dropout
• Post Regulation for Switching Supplies
• Mother Board I/O Power Supply