LT3592IDDB#TRPBF Overview

Save board space with 10-WFDFN Exposed Pad package. LED drivers have a total of 1 outputs that are used in the design of the drivers.As a mounting method, Surface Mount is used.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.The led light driver operates normally at -40°C~125°C TA. It is clear that Lighting will benefit from the program.400kHz~2.2MHz is the frequency in which it operates.The operation of this system is supported by 10 terminations.If the voltage supply is less than 3.6V, undetermined failures will occur.The number of segments is estimated to be 2.LT3592 is the base part number for the LED driver.The output voltage of the device is 30V.The device has a pin count of 10.There is a maximum value of 36V supply voltage supported by this device. In addition, it can also be categorized into Display Drivers based on its characteristics.

LT3592IDDB#TRPBF Features

Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 400kHz~2.2MHz
Supply voltage of 12V

LT3592IDDB#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LT3592IDDB#TRPBF LED Driver ICs applications.

• A- lamps
• LED Lightings for Industrial Equipment
• Portable lighting
• General lighting
• Down lighting
• Sports Facility Lighting
• LED headlights
• White LED Backlight for portable equipment
• LED Lighting PFCs, Linear Dimmable
• Gallery lighting