LT3598IFE#PBF Overview

The 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package saves space on the board. As part of the design of this LED driver, there are 6 outputs that have been used.As far as mounting is concerned, Surface Mount is adopted.With high efficiency, it appears as a DC DC Regulator.The led light driver is capable of operating at the operating temperature of -40°C~125°C TJ.It operates on the basis of the frequency of 200kHz~2.5MHz.There are 24 terminations that are designed to operate with it.This configuration is built upon 24 pins.Undetermined failures may occur when the voltage supply is less than 3V.60 segments are present.The LED driver can be found under the base part number LT3598.30V is an acceptable voltage.The voltage at the output terminal is 44V.On it, there are 24 pins.Depending on its characteristics, it is classified into Display Drivers.A minimal input voltage of 3.2V is required for it to operate.To meet high efficiency standards, it works with a voltage of 3.2V.It is possible to supply current up to 30V.In this case, the load can only be supplied with 30mA current.When the switching frequency is maintained at 2.5MHz, this electronic component is able to fully play its functions.LED drivers from the True Color PWM? series are essential components for a wide variety of products.

LT3598IFE#PBF Features

Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 200kHz~2.5MHz
Supply voltage of 5V
Switching frequency of 2.5MHz

LT3598IFE#PBF Applications

There are a lot of Linear Technology/Analog Devices LT3598IFE#PBF LED Driver ICs applications.

• Street lighting
• OLED power supply for portable equipment
• Down lights
• Down lighting
• LED Lightings for Inspection Devices
• LED Lighting PFCs, Linear Dimmable
• Linear fluorescent
• Refrigeration lighting
• Constant Voltage Power Source for portable equipment
• Architectural lighting