LT3652EDD#TRPBF Overview

The Tape & Reel (TR) package contains it.The 12-WFDFN Exposed Pad package includes it as a convenience.Device mounting type Surface Mount is specified.This is the right thing to do: set the temperature to -40°C~125°C TJ.Analog IC BATTERY CHARGE CONTROLLER is responsible for implementing the device.The device requires Constant - Programmable of current to charge.If you use the base part number LT3652, you can look for related parts.The overall number of terminations that can be found in it is 12 as a whole.It is 14.4V for the battery pack.Due to the 12 pins on it, it is a very simple circuit.Current, Timer, for example, can be programmed.There is 2A maximum charging current listed on the device.In order for the product to function as intended, there are 12 pins that must be connected.A 32V supply voltage can be applied to it.There is a possibility of high efficiency if the output voltage is set to 4.2V.There is a constant output current of 2mA when it is operating.Using a supply voltage as low as 4.95V will allow it to function.There is a minimum input voltage of 4.95V volts.A 20V input voltage is applied to the device.There is a maximum input voltage of 32V volts that it can take.

LT3652EDD#TRPBF Features

• Battery pack voltage of 14.4V

• 12-WFDFN Exposed Pad package

LT3652EDD#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LT3652EDD#TRPBF Battery Chargers ICs applications.

• Electric boat

• Locomotive

• Emergency/Security

• Automotive electronics

• GPS portable devices

• Ruggedized notebooks/tablet computers

• Automotive battery charger circuits

• Truck dealers

• Automotive/electrical vehicle

• Crosswalk marker lights