Tube is acceptable for shipping the power management.It is packaged the power management in 20-TSSOP (0.173, 4.40mm Width) Exposed Pad for ease of transportation.Surface Mount is an universal mounting way for easy adapting.It is intended to be used at Photoflash Capacitor Charger as well as for other applications.It is recommended that the operating temperature of the power management ic be set to -40°C~125°C in order to prevent malfunction.For its operation, this power management requires 4.75V~24V voltage.Alternatively, you may search for LT3751 to find more power ic's pin-to-pin solutions for your specific needs.On the power management, you will find 20 terminals.The instruments designs has received high praise because it is an analog POWER SUPPLY SUPPORT CIRCUIT IC.20 pins are present on the power managment ic.When powered by 5V voltage, the power manager is capable of performing a wide range of demanding tasks.The pinout of the power ic starts from 20 pins it has.The power management ic is powered by a voltage of 5.5mA volts.This item is ics supply of the Power Management Circuits series.In order for the ic supplies to operate, it will require at least 4.75V .As a result, 1 channels work together to maintain the quality of the output.If the power supply ic's voltage is higher than 24V , you shouldn't feed it.The power management chip can run on 5/24V power supplies.There are 1 outputs supported by it.
LT3751IFE#PBF Features
Mainly used in Photoflash Capacitor Charger applications Operating temperature: -40°C~125°C POWER SUPPLY SUPPORT CIRCUIT analog IC 1 Outputs
LT3751IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3751IFE#PBFPower Management applications.
Equipment Run-Off of Battery Backup
LP2996A: DDR1
SSTL-3 Termination
SSTL-2 Termination
Electronic Test Instrumentation
Chromebook
SmartPhones
In Conjunction With the Internal Feedback E/A of OEM Power Supply Units