LT3796EFE Overview

There is a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package on the board that is used to save space. 1 outputs are designed into LED drivers.For mounting, it uses the Surface Mount method.It emerges as a DC DC Controller with high efficiency.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.A frequency of 100kHz~1MHz is used to operate it.It operates with 28 terminations.It is possible that failures will occur if the voltage supply is below 6V.A total of 28 pins are present on this device.In this case, the maximum value will be 100V.An LED driver belonging to the True Color PWM? series is an essential component in a wide range of applications.The output voltage is 7.7V.There are 24V volts assigned to the circuit when operating the device.It is greatly simplified when used with input voltages greater than or equal to 6V.

LT3796EFE Features

Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~1MHz
Output voltage of 7.7V

LT3796EFE Applications

There are a lot of Linear Technology/Analog Devices LT3796EFE LED Driver ICs applications.

• Portable lighting
• Museum lighting
• Stage Lighting and Signage
• Gallery lighting
• LED backlight driver for LCD displays for portable equipment
• Panel lighting
• General lighting
• Street lighting
• Amusement Machines
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices