LT6010AIDD#PBF Overview

In order to protect the op amps, a 8-WFDFN Exposed Pad case is used. The instrumentation amplifier in this picture is of the General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are available on the instrumentation amplifier. The input offset voltage is 20μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . A supply current of 260μA can be used to operate this linear amplifier. Keeping the voltage gain at 126.02dB is the best course of action. On this instrumentation amplifier, there are 1 circuits that are connected together. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.

LT6010AIDD#PBF Features

8 Pins
supply voltage of 15V
126.02dB voltage gain
Output Type: Rail-to-Rail

LT6010AIDD#PBF Applications

There are a lot of Linear Technology/Analog Devices LT6010AIDD#PBF Instrumentational OP Amps applications.

• Radar
• Active probe
• Signal transformation
• Proportional operation circuits
• Thermocouples
• Broadcasting
• Computer workstations
• Power generator
• Medical instruments
• earphone