LT8391AEFE#PBF Overview

The 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used for saving board space. This LED driver has 1 outputs.As far as mounting is concerned, Surface Mount is adopted.With high efficiency and reliable performance, it emerges as a DC DC Controller.If the led driver ic is set to -40°C~125°C TJ, it will work normally.There are many benefits for Automotive, Lighting.As a result, it operates on the basis of frequency 600kHz~2MHz.The operation of this system is supported by 28 terminations.It is configured with 28 pins as its base.A voltage supply less than 4V could result in undetermined failures.The base part number for this LED driver is LT8391.In this device, there are 28 pins.Supply voltage can be set to a maximum value of 60V.When operating the device, 12V volts are assigned to the circuit.It works well when the input voltage is higher than 4V.High stability can be ensured when the input voltage is kept below 60V.

LT8391AEFE#PBF Features

Available in the 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 600kHz~2MHz

LT8391AEFE#PBF Applications

There are a lot of Linear Technology/Analog Devices LT8391AEFE#PBF LED Driver ICs applications.

• Street lighting
• LED backlight driver for LCD displays for Tablets and Note PCs
• LED Lighting PFCs, Linear Dimmable
• Constant Voltage Power Source for portable equipment
• Amusement Machines
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• A- lamps
• High-end retail lighting
• LED backlight driver for LCD displays for portable equipment
• Dimmable LED for vehicle interiors