LTC1277CSW#PBF Overview

The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 24-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 24 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 24 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 100k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The architecture that analogue to digital converter's core adopts is SAR.There are 24 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V -2.45V~5.25, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC1277 family.It is possible to categorize the supply type according to Dual.The supply/digital voltage of this electrical AD converter is 2.7V~5.25V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 2.048V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 20mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 20mW.The minimal analog input voltage of this electrical AD converter is -2.048V.There are 1 converters, which will convert numbers to words and figures to words. The dual supply type of this electronic AD converter is 5V.It operates with the maximal dual supply voltage of 5.25V.

LTC1277CSW#PBF Features

1 Functions
24 basic kinds of terminations
24 pin count
Minimal supply voltage of 4.75V

LTC1277CSW#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC1277CSW#PBF ADC applications.

• Multicarrier, multimode digital receivers
• Multiplexed Data Acquisition Systems
• 4-channel data acquisition
• Wireless and wired broadband communications
• AC motor control
• Rotary encoder
• Music reproduction technology
• Handheld Terminal Interface
• Spectrum Analysis
• Automotive