This LED driver IC features an enhanced 24-DIP (0.300, 7.62mm) package for driving common LEDs.In the Tube package, this receiver is mounted.The Transceiver can transceiver type enables this part to be used in a wide range of applications.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.Power supply requirements for this differential driver are 4.75V~5.25V.At any given time, there can be up to 6/6 eligible receivers/drivers for this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.This wide receiver has 24 terminations for driving and receiving data signals.In this package, you will find 24 market-standard pinouts for this transceiver.Since the base part number LTC1322 describes the product type, temperature, package, etc., you might get more options by searching with it.This ic receiver provided a 2-bit resolution capability. It is typical for this receiver to have a resolution of 2 bits when it is specified.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.It is designed so that it can be operated from a +-5V power supply with this driver IC.With the CONFIGURABLE INTERFACE STANDARDS; LOOP BACK; INDIVIDUAL DRIVER ENABLES function, this optical transceiver module improves accuracy and stability of signal management overall.The VCC pin of the ic receiver should receive enough but not more than 2mA of input current.It is recommended that the line driver ic's operating temperature be kept above -9V.
LTC1322IN#PBF Features
Tube package 24 pin count +-5V power supply
LTC1322IN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1322IN#PBF Drivers/Receivers/Transceivers applications.