2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP
HTS Code
8542.39.00.01
Subcategory
Line Driver or Receivers
Technology
CMOS
Voltage - Supply
3V~3.6V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
235
Number of Functions
3
Supply Voltage
3.3V
Terminal Pitch
0.65mm
Reach Compliance Code
not_compliant
[email protected] Reflow Temperature-Max (s)
20
Base Part Number
LTC1350
Pin Count
28
JESD-30 Code
R-PDSO-G28
Qualification Status
Not Qualified
Power Supplies
3.3V
Supply Current-Max
1mA
Data Rate
120KBd
Output Characteristics
3-STATE
Differential Output
NO
Output Polarity
INVERTED
Protocol
RS562
Input Characteristics
SCHMITT TRIGGER
Number of Drivers/Receivers
3/5
Driver Number of Bits
3
Receiver Number of Bits
5
Duplex
Full
Receiver Hysteresis
400mV
Interface Standard
EIA-232; EIA-562; TIA-562
Receive Delay-Max
800 ns
Transmit Delay-Max
3500 ns
Output Low Current-Max
0.0016A
Out Swing-Min
7.4 V
High Level Input Current-Max
0.000005A
Height Seated (Max)
2mm
Length
10.2mm
Width
5.3mm
RoHS Status
Non-RoHS Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1,316
$9.99998
$9.99998
LTC1350CG Product Details
LTC1350CG Overview
With the enhanced 28-SSOP (0.209, 5.30mm Width) package, this driver IC is excellent for driving common LEDs.Tube package is used for this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver requires a 3V~3.6V power supply.There can be up to 3/5 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.In order to drive and receive signals from data, this wide receiver has 28 terminations integrated.It is packaged with 28 pinouts that are market standard for this particular transceiver.Since the base part number LTC1350 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An important feature of this ic receiver was its 3-bit resolution capability.As a rule of thumb, this receiver is typically specified with a resolution of 5 bits.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.This driver IC is designed to operate from a 3.3V power supply.A 2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP function is also included in this optical transceiver module, which improves stability and accuracy of signal management.The optical transceiver module's VCC pin should receive enough input current, but not more than 1mA.
LTC1350CG Features
Tube package 28 pin count 3.3V power supply
LTC1350CG Applications
There are a lot of Linear Technology/Analog Devices LTC1350CG Drivers/Receivers/Transceivers applications.