LTC1435IS#PBF Overview

In the 16-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 3.5V~30V and has a 3.5V~30V supply voltage. Worked in a -40°C~85°C TA dc switcher before. Switching can be done at Up to 400kHz with this switching controller. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 16 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. In addition to "LTC1435", there are other relevant dc to dc converter ics you can find. 16 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 3.5V. DC regulator outputs 9V voltage according to the test statistics. The dc to dc regulator can only accept a maximum input voltage of 30V. You should note that the dc dc regulator's usual output current is 2A. DC switcher's Surface Mount qualifies it for most applications and prototypes. There is a maximum frequency of 138kHz for this dc regulators.

LTC1435IS#PBF Features

Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable, Soft Start
PULSE WIDTH MODULATION

LTC1435IS#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC1435IS#PBF DC to DC converter applications.

• Printing
• seismic instrument power circuits
• Constant current circuits
• Post equipment
• Grinders
• Program control systems
• Automatic plug-in machines
• Radio equipment
• Cutting machine tools
• Computed tomography (CT)