This driver chip is excellent for driving common LEDs due to its enhanced 28-SOIC (0.295, 7.50mm Width) package.Tape & Reel (TR) package is used for this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.It takes 4.5V~5.5V from the power supply to run this differential driver.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.With a voltage range of 5V, this driver IC can operate efficiently.A package consisting of 28 market standard pinouts is provided with this integrated circuit.This part number LTC1535 can be used to search for more variants based on the product type, temperature, package, etc.It is a 28-pin driver IC with enhanced power dissipation controls.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.An important feature of this ic receiver was its 1-bit resolution capability.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 73mA of input current.Using an antenna, there are 1 transmitters, which produce radio waves in order to transmit or send data.This can transceiver works with dual supply voltage, so you should choose a power supply suitable for 4.5V.