LTC1625CGN#PBF Overview

It comes in a 16-SSOP (0.154, 3.90mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 3.7V~36V voltage are supplied and operated. A 0°C~70°C TA dc switcher is not a problem. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. LTC1625 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 36V. You should note down the dc dc regulator's usual output current of 2A when you start a project. Switching controller operates at a frequency of 150kHz. You can set the input voltage to 15V for nominal working status. The dc switcher's maximum input voltage is 36V; users must limit it accordingly. There must be a 3.7V supply voltage. DC switcher will not be able to provide an output current above 2A volts. Its datasheet indicates the switching converter can output a maximum of 5.1V volts. voltage controllers with a minimum voltage output of 1.178V cannot operate.

LTC1625CGN#PBF Features

Transistor Driver Outputs
Enable, Soft Start
PULSE WIDTH MODULATION
Frequency: 150kHz

LTC1625CGN#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC1625CGN#PBF DC to DC converter applications.

• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers