LTC1628CG-PG#PBF Overview

As a result of 28-SSOP (0.209, 5.30mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 2. The pmic is packaged in Tube solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 3.5V~30V are the dc control's supply voltage and operating voltage, respectively. Worked in a 0°C~85°C TA dc switcher before. Using this switching controller, it is possible to switch at 220kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control, Power Good, Soft Start which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. An array of 28 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Other relevant dc to dc converter ics will be returned if you search "LTC1628". In total, switching converter has 28 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. Test statistics indicate DC regulator outputs 5V voltage. The dc to dc regulator can only accept a maximum input voltage of 36V. You should note down the dc dc regulator's usual output current of 3A when you start a project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator's maximum frequency is 360kHz.

LTC1628CG-PG#PBF Features

Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION

LTC1628CG-PG#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC1628CG-PG#PBF DC to DC converter applications.

• Television equipment
• Communication system
• PSRR circuits
• Pipe bending machines
• Sensitive electronic devices
• SMT equipment
• Grinders
• Solar power plants
• Refrigerators of central air conditioners
• Geothermal power