LTC1643AL-1IGN#PBF Overview

In the 16-SSOP (0.154, 3.90mm Width) package you will find it.Channel 4 is currently available.A Tube-shaped package holds it.The 16 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 16 pins.The supply voltage 12V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for CompactPCI™ are available on the device.A feature of Latched Fault, Thermal Limit, UVLO describes it.Using a 3.3V 5V ±12VV power source should be able to power the device.The LTC1643 family includes it.Hot-swappable device has Current Limit, Fault Timeout, Slew Rate programmable features.Vsup is set to 12.6V, the maximum supply voltage.Part +-12V is associated with power supplies.The maximum supply current it requires to operate is 8mA.Device 200mA 500mAV has a maximum output.With the help of this device, IT ALSO REQUIRES A -12V SUPPLY can also be produced.

LTC1643AL-1IGN#PBF Features

The terminal position of 16
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate

LTC1643AL-1IGN#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC1643AL-1IGN#PBF hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems