LTC1731EMS8-4.2#PBF Overview

There is a package for Tube in which it can be found.We've included it in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number LTC1731 can be found by following the order of the base part number.It contains a total of 8 terminations.As far as the battery pack is concerned, it is 4.2V.It is equipped with 8 pins.There are various programmable features, such as Timer.It requires pins 8 to function.The number of available channels is 1.It should be able to run off a battery of 6V.In order for the device to operate properly, the supply voltage should not exceed 12V.When the output voltage is 4.2V, high efficiency is possible.In this case, the output current of the device is set to 500mA.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 4.5V is suitable for it, because it can operate with a low supply voltage.A minimum input voltage of 4.5V volts is required for this device.Input voltage is limited to 12V volts.As a maximum output supply voltage for this operation, the voltage must be set to 4.1V.

LTC1731EMS8-4.2#PBF Features

Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package

LTC1731EMS8-4.2#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC1731EMS8-4.2#PBF Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift