LTC1734ES6-4.2#TRMPBF Overview

There is a package for Cut Tape (CT) in which it can be found.We've included it in the SOT-23-6 Thin, TSOT-23-6 package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of BATTERY CHARGE CONTROLLER must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number LTC1734 can be found by following the order of the base part number.It contains a total of 6 terminations.As far as the battery pack is concerned, it is 4.2V.It is equipped with 6 pins.There are various programmable features, such as Current.It requires pins 6 to function.In order for the device to operate properly, the supply voltage should not exceed 8V.When the output voltage is 4.2V, high efficiency is possible.In this case, the output current of the device is set to 700mA.A supply voltage of 4.55V is suitable for it, because it can operate with a low supply voltage.A minimum input voltage of 4.55V volts is required for this device.Voltage input for the device is 5V.Input voltage is limited to 8V volts.

LTC1734ES6-4.2#TRMPBF Features

Battery pack voltage of 4.2V
SOT-23-6 Thin, TSOT-23-6 package

LTC1734ES6-4.2#TRMPBF Applications

There are a lot of Linear Technology/Analog Devices
LTC1734ES6-4.2#TRMPBF Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift