LTC1735CS#PBF Overview

As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4V~30V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where 0°C~85°C TA is the 0°C~85°C TArm. The switching controller is capable of switching at the 300kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Power Good, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 16. It is inputted with a DC switcher's voltage of 15V. A search for "LTC1735" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 6V voltage. It's important to remember that the dc dc regulator's normaloutput current is 3A, so you should note it down when starting a new project. DC regulators have a maximum frequency of 335kHz. In order to limit the voltage of a dc switcher whose maximum input voltage is 36V, it must be limited by the user. Voltage 4V is necessary for the supply. Input current cannot exceed 3A with this dc switcher. At its maximum, the switching converter can output 6V volts. At its lowest voltage, the voltage controller does not produce less than 800mV.

LTC1735CS#PBF Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good, Soft Start

LTC1735CS#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC1735CS#PBF DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery