LTC1992-5HMS8#PBF Overview

There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. A Differential-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In recent months, the number of terminations has approached 8. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 250μV voltage. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 700μA, this op amp ic can operate. There should be no change in the voltage gain at 80dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Differential, Rail-to-Rail signals. A voltage rating of 1 is indicated for the op amp's operating supply voltage. During testing, the instrumentation amplifier resistance should remain within a range of 38kOhm.

LTC1992-5HMS8#PBF Features

8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Differential, Rail-to-Rail
Resistance of 38kOhm

LTC1992-5HMS8#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC1992-5HMS8#PBF Instrumentational OP Amps applications.

• High/low-pass filter circuit
• Proportional counter tubes
• Active probe
• Biopotential
• Signal operation
• Video data acquisition
• Digital cameras
• Radar
• Automation control systems
• Differentiator circuits