Name: LTC2052HVIS
Brand: Linear Technology/Analog Devices
SKU: LTC2052HVIS
Availability: InStock

new-10%

LTC2052HVIS

Manufacturer part number:LTC2052HVIS

Manufacturer:Linear Technology/Analog Devices

Description:90pA 120 dB Instrumentational OP Amps 0.0003μA 2.7V~12V ±1.35V~6V LTC2052 14 Pins 14-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:LTC2052HVIS Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	16 Weeks
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2008
JESD-609 Code	e0
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	255
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	LTC2052
Pin Count	14
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Number of Elements	4
Number of Circuits	4
Operating Supply Current	1mA
Supply Current-Max	6mA
Slew Rate	2V/μs
Architecture	CHOPPER-STAB
Amplifier Type	Chopper (Zero-Drift)
Common Mode Rejection Ratio	120 dB
Current - Input Bias	90pA
Voltage - Supply, Single/Dual (±)	2.7V~12V ±1.35V~6V
Input Offset Voltage (Vos)	500nV
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	3000 kHz
Average Bias Current-Max (IIB)	0.0003μA
Power Supply Rejection Ratio (PSRR)	120dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	1μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00015μA
Programmable Power	NO
Dual Supply Voltage	5V
Neg Supply Voltage-Max (Vsup)	-6V
Nominal Gain Bandwidth Product	3MHz
Wideband	NO
Voltage Gain-Min	562000
Height Seated (Max)	1.75mm
Length	8.65mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

LTC2052HVIS Product Details

LTC2052HVIS Overview

Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 14 terminations. The pins on this board total to 14 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 14 pins are present on the instrumentation amplifier. Op amp rates 500nV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 1mA, this op amp ic can operate. On this instrumentation amplifier, there are 4 circuits that are connected together. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A total of 4 elements are present in this linear amplifier. There are a maximum of 562000 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain.