LTC2055IMS8#PBF

join

new-10%

Manufacturer part number:LTC2055IMS8#PBF

Manufacturer:Linear Technology/Analog Devices

Description:1pA 130 dB Instrumentational OP Amps 0.00015μA 2.7V~6V LTC2055 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:LTC2055IMS8#PBF Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2009
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	LTC2055
Pin Count	8
JESD-30 Code	S-PDSO-G8
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Number of Circuits	2
Current - Supply	130μA
Slew Rate	0.5V/μs
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	130 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~6V
Gain Bandwidth Product	500kHz
Unity Gain BW-Nom	500 kHz
Average Bias Current-Max (IIB)	0.00015μA
Low-Offset	YES
Voltage - Input Offset	0.5μV
Low-Bias	YES
Micropower	YES
Input Offset Current-Max (IIO)	0.0003μA
Voltage Gain-Min	120
Common-mode Reject Ratio-Min	115 dB
Height Seated (Max)	1.1mm
Length	3mm
RoHS Status	ROHS3 Compliant

Quantity	Unit Price	Ext. Price
1	$4.64000	$4.64
25	$3.08160	$77.04
100	$2.54800	$254.8
250	$2.42060	$605.15
500	$2.36600	$1183

LTC2055IMS8#PBF Overview

There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. Op amps are Zero-Drift types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. There are 2 circuits on op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. As a recommendation, this electronic component should be used with a power supply that can deliver 130μA. There is a minimum voltage gain of 120 that this buffer op amp is capable of conducting.