LTC2435CGN#PBF Overview

The analogue to digital converter is designed with 20 Bits.The AD converter is embedded in the 16-SSOP (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The A/D converter has 1 channels.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 15 Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC2435 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single describes the type of supply.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.Surface Mount can be used to mount the AD converter on the wall.The ADC converter operates with the maximal supply voltage of 5.5V.1 inputs are employed.It operates with the minimal supply voltage of 2.7V.The ADC converter operates from 3/5V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 1mW.There are 2 converters, which will convert numbers to words and figures to words. It is a type of FPGA belonging to the microPOWER? series.

LTC2435CGN#PBF Features

1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
microPOWER? series

LTC2435CGN#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC2435CGN#PBF ADC applications.

• Multicarrier, multimode digital receivers
• TD-SCDMA, WiMAX
• Micro and pico cell systems, software radios
• High Speed Data Acquisition
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• Industrial Process Control
• Digital Storage Oscilloscope
• Wireless and wired broadband communications
• Digital Multimeters, PLC's (Programming Logic Controllers)
• Spectrum Analysis