LTC2616CDD#PBF Overview

The package that contains this software is called 10-WFDFN Exposed Pad. Power is provided by a 3V-volt supply. Part of the Other Converters family, this FPGA part is a programmable gate array. With a Surface Mount connector, this FPGA module can be attached to the development board. During the operation of the system, the operating temperature should remain within the range of 0°C~70°C. This FPGA model is contained in Tube for space saving. In total, it has 10 terminations on each end. If you are looking for related parts, you can use the base part number LTC2616 as a starting point. This cable has 10 pins and is designed to connect to a computer. Having stated that, if this FPGA is mounted in Surface Mount, then it may be able to perform fantastically according to its specifications. The device runs on a 3/5V battery and requires no additional power supply to operate. In addition to this, it has 10 pins. It can accept a maximum voltage of 5.5V volts as a supply voltage. Using 2.7V as the minimum supply voltage, it can operate.

LTC2616CDD#PBF Features

10-WFDFN Exposed Pad package
10 pin count
10 pins

LTC2616CDD#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC2616CDD#PBF Digital to Analog Converters (DAC)?applications.

• Instrumentation:
• LMDS/MMDS, point-to-point
• Basestations
• Digitally Controlled Attenuators and Power Supplies
• Voltage Set Point Control
• Low bandwidth data acquisition systems
• Low Power Systems
• Instrumentation
• Direct Digital Waveform Generation
• Optical Networks