Driver ICs with enhanced 38-WFQFN Exposed Pad packages are excellent for driving LEDs with common characteristics.This receiver is mounted in the Tape & Reel (TR) package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.On any Surface Mount-type PCB or development board, this wide receiver can be placed.Power supply for this differential driver is 5V.There can be up to 3/3 eligible receivers/drivers on the field at the same time with this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.An output voltage range of 5V is sufficient to run this line driver ic efficiently.Integrated into this wide receiver are 38 terminations that are used for driving and receiving signals from data.A package consisting of 38 market standard pinouts is provided with this integrated circuit.Since the base part number LTC2847 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.There is a capability of 3-bit resolution with this ic receiver.As a rule of thumb, this receiver is typically specified with a resolution of 3 bits.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.IC3.35V is a high performance driver IC designed to work with a 3.35V power supply.It is important to supply enough input current to the VCC pin of the ic receiver, but not exceeding 170mA.