An excellent driver IC for common LEDs thanks to its enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.In this package, the receiver is mounted in the Tape & Reel (TR) format.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver requires a 4.5V~5.5V power supply.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.The operating temperature of this ic receiver is -40°C~125°C. It is primarily designed for applications with low temperatures.With a voltage range of 5V, this driver IC can operate efficiently.In order to drive and receive signals from data, this wide receiver has 8 terminations integrated.There are 8 pinouts available on this transceiver which are market standard.For more variants of this part, try searching with the base part number LTC2856, which indicates the product type, temperature, package, etc.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.This receiver is typically specified with a resolution of 1 bits. It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.It is designed so that it can be operated from a 5V power supply with this driver IC.Enough but no exceeding 1.1mA of input current should be supplied to the VCC pin of the ic receiver.