LTC2914CGN-1#TRPBF Overview

As you can see, this power management is mounted through 16 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are a total of 4 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of 16-SSOP (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 4 supply voltages. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 16 pins are located on this power management. Surface Mount mounting is recommended. We recommend setting the supervisors to 0°C~70°C TA degrees. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. It is always advisable to use LTC2914, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 3.3V power to power this power management.

LTC2914CGN-1#TRPBF Features

Multi-Voltage Supervisor type

LTC2914CGN-1#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LTC2914CGN-1#TRPBF Voltage Supervisors applications.

• Transformer load monitoring equipment
• Detection of phase sequence
• Dash board
• Electrical fire monitoring system
• Refrigeration
• Radio
• Radar
• Leakage protection
• Network equipment
• Battery cars