LTC2919IMS-3.3#PBF Overview

Power management is mounted through 10 terminals. Packaging is in the form of a Tube. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for you to refer to. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 3. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 10 pins are present in total in this power management. This power management has 10 pins. There should be a minimum voltage supply (Vsup) of 500mV for this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. A similar IC managements number of the manufacturer can always be found by using LTC2919, the base power ics number.

LTC2919IMS-3.3#PBF Features

Multi-Voltage Supervisor type
Minimum supply voltage of 500mV

LTC2919IMS-3.3#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC2919IMS-3.3#PBF Voltage Supervisors applications.

• Telecommunications equipment
• Insulation fault location system
• Satellite navigation
• Important electronics for automotive protection
• Automotive permanent magnet synchronous motors
• Computer applications
• Radio
• DC stabilized power supply module
• Power distribution systems of infant care room
• Magnetic resonance imaging