LTC2960ITS8-3#TRMPBF Overview

As you can see, this power management is mounted through 8 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SOT-23-8 Thin, TSOT-23-8 functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at NOT SPECIFIED. IC management conducts in a 7V-voltage supply. IC management conducts in a 2-voltage supply. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 8 pins are located on this power management. Pin count of the power management is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.5V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 36V volts. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. A similar IC managements number of the manufacturer can always be found by using LTC2960, the base power ics number. The voltage supervisor requires a power source of 7V volts in order to work correctly.

LTC2960ITS8-3#TRMPBF Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V

LTC2960ITS8-3#TRMPBF Applications

There are a lot of Linear Technology/Analog Devices LTC2960ITS8-3#TRMPBF Voltage Supervisors applications.

• Refrigeration
• Electrical fire monitoring system
• Leakage current detection
• Automotive permanent magnet synchronous motors
• Sensitive sensors
• Insulation fault location system
• Important electronics for automotive safety
• Automotive power systems
• DVR
• Satellite navigation