LTC3713EG#TRPBF Overview

As a result of 24-SSOP (0.209, 5.30mm Width) compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 1.5V~36V voltage are supplied and operated. Worked in a -40°C~85°C TA dc switcher before. Using this switching controller, it is possible to switch at 1.4MHz. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Power Good, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . An array of 24 terminations of dc switching. There is a DC switcher's nominal voltage of 15V. In addition to "LTC3713", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 24 pins. An input voltage of 4V is the minimum required for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 32.4V. Voltages 30V are the maximum that the dc to dc regulator will accept. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. This dc regulatorhas a max frequency of 1.5MHz.

LTC3713EG#TRPBF Features

Transistor Driver Outputs
Switching Frequency: 1.4MHz
Enable, Power Good, Soft Start

LTC3713EG#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LTC3713EG#TRPBF DC to DC converter applications.

• Emergency lighting monitoring equipment
• CMM
• Ball screw pair
• Shearing machines
• Motor controller circuits
• Combined machine tools
• Smoke prevention equipment
• Servo drive system
• Power supplies of electronic gadgets
• Hydro power