LTC3718EG#PBF Overview

There are 1 outputs supported by the voltage regulator. The alternator regulator is packaged in a 24-SSOP (0.209, 5.30mm Width) container to facilitate transportation. Ready for shipping in Tube package. There is a general voltage output of 0.75V~18Von this voltage controller. Surface Mount universial mount for easy adapting. The shunt regulator is intended for use in applications such as Controller, DDR, QDR and others. In order to prevent malfunctions, the operating temperature should be set to -40°C~85°C. The variable voltage regulator input voltage is designed to be 1.5V~36V. It is possible to find 24terminals on the voltage regulator. Unless otherwise stated, the pinout of the alternator regulator begins with 24pins. Try search LTC3718 to get more pin-to-pin solutions for your special needs. There are 24 pins on the power supply regulator. There should be 2A output from the electrical regulator at the moment. As the power regulator is supplied with a voltage of 1.5V, it can perform a wide range of demanding tasks. At its maximum, it will produce current 2A. The power supply regulator allows a minimum supply voltage of 1.5VV. The voltage regulator has a maximum supply voltage of 10V. The interface of this rectifier regulator is provided by a BUS TERMINATOR SUPPORT CIRCUIT IC.

LTC3718EG#PBF Features

Widely used in Controller, DDR, QDR applications
Adopts BUS TERMINATOR SUPPORT CIRCUIT interface IC

LTC3718EG#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC3718EG#PBF Specialized Voltage Regulators applications.

• Telecom/Datacom
• DAC Controlled High Current Output Stage
• Notebook and Subnotebook Computers
• GSM Base Station
• PoE applications
• Communications Infrastructure
• Embedded Systems
• Handheld PC Power
• Digital-Still Cameras
• Car Navigation Displays