LTC3729EUH#PBF Overview

This switching controller fits most application requirements since it is packaged in a 32-WFQFN Exposed Pad package. There is enough capacity in the dc motor controller to generate the output for the 2 input. A solid enclosure of Tube surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4V~36V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 260kHz~550kHz position. Surface Mount makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Phase Control, Power Good, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . An array of 32 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis 15V volts. Other relevant dc to dc converter ics can be found by searching "LTC3729". There are a total of 32 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator should be 4V. The test statistics indicate that DC regulator outputs a voltage of 5V. This dc to dc regulator accepts only 36V input voltage at most. If you start a project, note down the dc dc regulator's usual output current of 240mA. DC regulator590kHz has the maximum frequency. The dc to dc voltage regulator is from the PolyPhase? series. Channels 1 are required for high-quality communication.

LTC3729EUH#PBF Features

Transistor Driver Outputs
Switching Frequency: 260kHz~550kHz
Current Limit, Enable, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION

LTC3729EUH#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC3729EUH#PBF DC to DC converter applications.

• Television equipment
• USB circuits
• Shearing machines
• Servo drive system
• Communication system
• CMM
• ATMs
• Lathes
• Linear guide
• SMT equipment