LTC3729LEUH-6#TRPBF Overview

Capsuled in the 32-WFQFN Exposed Pad package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 2. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). 4V~30V is the supply voltage and the operating voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~85°C TA. Using this switching controller, it is possible to switch at 260kHz~550kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Phase Control, Power Good, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. A variety of dc switching's functions can be performed on 32 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 15V. Other relevant dc to dc converter ics can be found by searching "LTC3729". Pins number 32 of switching converter in total. It is recommended that the dc dc voltage regulator's minimum input voltage be 4V. DC regulator outputs 5V voltage based on test statistics. The dc to dc regulator is limited to 30V input voltage. You should note down the dc dc regulator's usual output current of 240A when you start a project. There is a maximum frequency of 620kHz on this dc regulators. A dc to dc voltage regulator in the PolyPhase? series, it belongs to this family. A high-quality communication requires 1 channels.

LTC3729LEUH-6#TRPBF Features

Transistor Driver Outputs
Switching Frequency: 260kHz~550kHz
Current Limit, Enable, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION

LTC3729LEUH-6#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LTC3729LEUH-6#TRPBF DC to DC converter applications.

• Terrestrial set-top boxes
• Grinders
• Computer application technology
• Various CNC machine tools
• Correction machines
• Photovoltaic power
• Die casting equipment
• Program control systems
• Balance equipment
• Remotely powered electric motors