LTC3774IUHE#PBF Overview

In the 36-WFQFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. There is a Tube solid enclosure around the pmic. With this function, you can deal with PWM Signal dc switching's outputs (s). DC control operates at 4.5V~38V volts and has 4.5V~38V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at 150kHz~1.2MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking is included in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. QUAD are the position of the terminal of the switching converters. Various 36 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. In addition to "LTC3774", there are other relevant dc to dc converter ics you can find. There are 36 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. The dc to dc regulator can only accept 38V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. Voltage regulator dc to dc is designed to operate at 98 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Hence, OUTPUT VOLTAGE RANGE FROM 0.6 VOLT TO 3.5 VOLT is used to better suit the DC to DC voltage regulator's situation. The dc to dc voltage regulator is from the PolyPhase® series.

LTC3774IUHE#PBF Features

PWM Signal Outputs
Switching Frequency: 150kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 98 %
OUTPUT VOLTAGE RANGE FROM 0.6 VOLT TO 3.5 VOLT

LTC3774IUHE#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC3774IUHE#PBF DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment