LTC3775IMSE#TRPBF Overview
In the 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~38V volts and has 4.5V~38V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at 250kHz~1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. In addition to "LTC3775", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. DC regulator outputs 5.2V voltage based on test statistics. The dc to dc regulator can only accept 38V input voltage. DC regulator1MHz has the maximum frequency. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 30.4V is used to better suit the DC to DC voltage regulator's situation. The dc to dc voltage regulator is from the PolyPhase® series.
LTC3775IMSE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 30.4V
LTC3775IMSE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices
LTC3775IMSE#TRPBF DC to DC converter applications.
- Network technology
-
- Automation technology
-
- CMM
-
- Various precision measuring instruments
-
- Various precision measuring detectors
-
- Flaw detection equipment
-
- Balance equipment
-
- Industrial robots
-
- Industrial controllers
-
- Die casting equipment
-
