LTC3786IUD#PBF Overview
In the 16-WFQFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Tube enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.5V~38V. Suitable for a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 105kHz~760kHz. The Surface Mount value makes it suitable for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a QUAD terminal on the switching converters. 16 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. A search for "LTC3786" will reveal other relevant dc to dc converter ics. Switching converter has a total of 16 pins. Switching converter type is specifically Switching Regulator or Controllers. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. Statistically, DC regulator outputs 60V volts. The dc to dc regulator can only accept a maximum input voltage of 38V. There is a maximum frequency of 850kHz for this dc regulators. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE UP TO 60V.
LTC3786IUD#PBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~760kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE UP TO 60V
LTC3786IUD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3786IUD#PBF DC to DC converter applications.
- Hydrogen power
-
- Printing equipment
-
- Terrestrial set-top boxes
-
- Remotely powered electric motors
-
- Special machining machine tools
-
- Computer application technology
-
- Post equipment
-
- Hydraulic presses
-
- Computer-related products
-
- Experimental setup
-
